Skip to Main Content Accessibility Statement

Labels

Labels for Portable Printers

Labels for Safety, Visuals and Facility ID Desktop Printers

Labels for Product, Wire and Lab ID Benchtop Printers

Labels by Application

Labels for Automation

Labels by Property

Labels for Inkjet Printers

Resources

Support

Product Certification Request

Printers

Portable Printers

Safety and Facility ID Desktop Printers

Product, Wire and Lab ID Benchtop Printers

Printers by Application

Automated Labeling

Printers by Feature

Ribbons, Ink, and Cartridges

Barcode Scanner and Printer Kits

Industrial Barcode Scanners

Barcode Labels

Barcode Printers

Barcode Scanner and Printer Kits

Software by Brand

Software by Application

ToughStripe Floor Tapes

Virtual Line Projectors

Lean/5S Tape

Barricade Tape

Caution and Warning Tape

DOT Reflective Tape

Pavement Marking Tape

Underground Warning Tapes

PaintStripe Floor Marking Stencils

Product Certification Request

Lockout Tagout

Padlocks

Cable Lockouts

Electrical Equipment Lockouts

Valve Lockouts & Hose Lockouts

Lockout Tagout Kits

Lockout Tagout Stations

Lockout Hasps

Lockout Tagout Tags

Group Lock Boxes & Permit Control

Lockout Training

Lockout Tagout Labels

Lockout Tagout Signs

Lockout Tagout Software

Confined Space Covers

Brady LINK360 Safety Software

Brady Safety Lockout Tagout Services

Resources

Support

Product Certification Request

Signs

Safety Signs

Security and Admittance Signs

Fire and Emergency Signs

Hazardous Material Signs

Custom Signs

Traffic and Parking Signs

Specialty Signs

Office and Facility Signs

Safety and Sign Accessories

Print Your Own Pipe Markers

Arrow and Pipe Banding Tapes

Pipe Marker Accessories & Mounting Brackets

Product Certification Request

Ammonia pipe labeling requirements – IIAR & ASME/ANSI

Pressurized anhydrous ammonia is used as a commercial refrigerant due to its ability to absorb substantial amounts of heat from its surroundings. Industrial settings that use it, including food and beverage processing, cold storage and meatpacking, must adhere to ammonia pipe labeling requirements. Below, we'll break down the standards and requirements, including the ammonia piping color code, lettering and placement set forth by ANSI/ASME, in addition to the International Institute of Ammonia Refrigeration's IIAR Bulletin 114. Before you dig in to the standards, however, it’s important to understand the dangers of ammonia and the importance of using pipe labels and tags on this potentially hazardous chemical.

Dangers of pressurized anhydrous ammonia

Uncontrolled releases of anhydrous ammonia can be harmful to human health, corrosive and explosive when not properly maintained or controlled. Anhydrous ammonia carries a health hazard designation of 3 on the NFPA fire diamond, with threats including:

Irritation and corrosiveness to the skin, eyes, respiratory tract and mucous membranes
Severe chemical burns and frostbite to the eyes, lungs and skin
Aggravation of existing skin and respiratory-related diseases

The EPA has documented a number of accidents, including a meat-packing plant where a refrigeration line ruptured. Eight workers were critically injured, suffering respiratory burns from ammonia inhalation.^[1]

The importance of ammonia pipe labeling

When workers and emergency response personnel follow ammonia pipe labeling standards, it helps effectively identify the pipe and follow where it’s going, especially to valve shutoffs in order to stem further release. Pipes that adhere to IIAR pipe marking standards can also be used in safety training for current and new employees and assist with efficiency during maintenance and servicing. During such events using proper lockout tagout devices, like valve lockouts, in conjunction with proper labels can ensure the safety of you and your team.

Ammonia pipe marking regulations

Two organizations supply documents that inform how ammonia pipes are to be labeled:

ASME (ANSI) A13.1 - 2020: Scheme for the Identification of Piping Systems^[2]

This ASME standard is a widely used guideline in determining pipe identification requirements. It indicates that “A13.1 is intended to establish a common system to assist in identification of hazardous materials conveyed in piping systems and their hazards when released in the environment.” Find additional information on ANSI pipe marking standard guidelines.

Pipe Marking Color Codes

Label Color	Text Color	Pipe Contents
Red	White	Fire-quenching fluids
Orange	Black	Toxic and corrosive fluids
Yellow	Black	Flammable fluids
Brown	White	Combustible fluids
Green	White	Potable, cooling, boiler feed and other water
Blue	White	Compressed air
Purple	White	Defined by user
Gray
Black
White	Black	Defined by user

IIAR Guidelines for Identification of Ammonia Refrigeration Piping and System Components, Bulletin No. 114, March 2014^[3]

IIAR Bulletin 114 is meant to “establish uniform guidelines for identifying piping in a closed-circuit ammonia refrigeration system and the related refrigeration system components.” IIAR Bulletin 114 offers these guidelines specifically for the ammonia refrigeration industry, and uses ASME Standard A13.1 to inform it. As anhydrous ammonia is classified as a “toxic and corrosive fluid,” safety orange is the appropriate base label color.

Important note: IIAR Bulletin 114 was updated in 2014 to accurately reflect safety orange as the primary recommended label color under an update to the ASME standard in 2007. Prior to that, yellow was used. However, this doesn’t mean that all markers, including those made prior to 2014, must be updated. Section 1 of ASME A13.1 states that “Existing schemes for identification shall be considered as meeting the requirements of this Standard if: (a) such schemes are described in writing; (b) employees are trained as to the operation and hazards of the piping system.”

Ammonia pipe marking guide: color code, lettering and positioning

There are 5 sections on an ammonia pipe label that follow the ammonia piping color code and other requirements.

Marker body (ammonia)

The pipe marker body should be safety orange with “AMMONIA” printed in black letters.

Physical state (liquid, vapor or both)

Ammonia refrigerant exists in a liquid or vapor state, or both. Following are guidelines for each:

Liquid: Print “LIQ” in black letters on a yellow band in a circumferential arc adjacent and left of “AMMONIA”
Vapor: Print “VAP” in black letters on a sky blue band in a circumferential arc adjacent and left of “AMMONIA”
Liquid and vapor: See first two bullets for color and text guidelines; apply “VAP” adjacent and left of “AMMONIA” and “LIQ” adjacent and left of “VAP”

Pressure (high or low)

Pressure greater than 70 PSIG: Print “HIGH” in black letters on a red band in a circumferential arc adjacent and right of “AMMONIA”
Pressure less than or equal to 70 PSIG: Print “LOW” in black letters on a green band in a circumferential arc adjacent and right of “AMMONIA”

Abbreviations (HTRL, LTRS, etc.)

Industrial ammonia refrigeration systems are composed of interconnected pipes with varying temperature, vents, suctions, discharges and more. Abbreviated names identify these specific parts of the system. Abbreviations should be printed in black letters on the safety orange field adjacent and left of the physical state.

Directional arrow ( ← → )

Directional arrows should be black in color and proportionate in size to the marker. They may or may not be applied around the full pipe circumference.

List of common abbreviations (see sec. 4)

Abbr.	System
BD	Booster Discharge
CD	Condenser
DC	Defrost Condensate
EQ*	Equalizer
ES	Economizer Suction
HGD	Hot Gas Defrost
HPL	High Pressure Liquid
HSD	High Stage Discharge
HSS	High Stage Suction
HTS*	High Temperature Suction
HTRL	High Temperature Recirculated Liquid
HTRS	High Temperature Recirculated Suction
LTRL	Low Temperature Recirculated Liquid
LTS*	Low Temperature Suction
LTRS	Low Temperature Recirculated Suction
LIC	Liquid Injection Cooling
LSS	Low Stage Suction
PO*	Pump Out
PU*	Purge
RV	Relief Vent
TSR	Thermosyphon Return
TSS	Thermosyphon Supply

*Not currently covered in the IIAR standard

3 easy ways to help you follow ammonia pipe labeling requirements

Put the power of on-demand printing in your facility’s toolbox. Or, select from a variety of preprinted ammonia pipe markers.

Ammonia IIAR pipe market label kit with components, including labels, ribbon and roll

Ammonia (IIAR) Pipe Marker Label Kits

Control messaging and inventory with these modular kits. Simply add specific text and arrow legends to the pipe marker body using Brady Workstation premade templates. Then print using a compatible Brady printer and apply physical state and pressure labels.

BradyJet J4000 industrial label printer sitting on top of a metal shelf

BradyJet J4000 Color Label Printer with Software

Convenience and customization come together perfectly thanks to this this all-in-one inkjet printing solution. Using Brady Workstation software and premade templates, you can easily create full-color labels, hit print once and apply where you need.

Pre-Printed Ammonia Pipe Markers

Select from markers with prepopulated text. Then choose different sizes and materials that ensure your markers fit where you need and hold up in the environments they face.

References

Hazards of Ammonia Releases at Ammonia Refrigeration Facilities (Update). U.S. Environmental Protection Agency. (2001, August). Retrieved October 25, 2021, from https://19january2021snapshot.epa.gov/sites/static/files/2013-11/documents/ammonia.pdf.
A13.1 - Scheme for the Identification of Piping Systems. ASME. (n.d.). Retrieved October 22, 2021, from https://www.asme.org/codes-standards/find-codes-standards/a13-1-scheme-identification-piping-systems.
Guidelines for: Identification of Ammonia Refrigeration Piping and System Components. International Institute of Ammonia Refrigeration (IIAR). (2014, March). Retrieved October 22, 2021, from http://web.iiar.org/membersonly/PDF/CO/Bulletin_114_REV032014.pdf.